The Best Magnetic Drill with Reviews 2024

Disclaimer: None of our reviews are sponsored. We earn a commission when you purchase items through our links.

Fabricators and contractors who work with metal know how valuable a magnetic drill is.

If you want a steady, stable surface when working with these kinds of materials, a magnet drill is the only way to go.

This might not be a tool that everyone needs but there are plenty of options available whether you want to invest a little or a lot.

Let’s take a look at the following mag drill reviews.

Quick Picks

Here's 3 products we picked out that thought you would be interested in depending on your budget...

Best Pick
Milwaukee 4206-1
This gets consistently great reviews. Users are hard pressed to find anything bad to say about it. It's commercial grade and a great investment - well worth the money if you want the best.
Best Value
If you're looking for better value for your money, then you can't go wrong with this model from DeWalt. A popular mag drill with many great reviews from users.
Best Budget
Steel Dragon Tools MD40
Steel Dragon Tools MD40"]Hobbyists or anyone looking for a mag drill to do a few jobs are a perfect match for the Steel Dragon MD40. For a bargain price, it can get the job done with most metals.

The Best Magnetic Drill Press with reviews 2024

Here's a list of magnetic drill presses we found:

1. Milwaukee 4206-1 Electromagnetic Drill Press - Top Pick

  • Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 350 RPM
  • Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling
  • 3/4” Capacity: Taps up to 1-inch, 14-threaded holes
  • Maximum force: Develops up to 1670 pounds of drill point pressure with a 1-inch steel plate
  • Solid state electronic switching: Offers faster, smoother and quieter switching for a longer product lifespan
  • Line Lockout: Prevents tool from operating if voltage is restored to an interrupted line


  • Adjusts front to back and has side to side tilt for versatility
  • Powerful
  • Easy to change bits without breakage
  • High-quality base and mag drill in one package


  • Expensive
  • Big investment if you're not going to use it regularly
  • Commercial grade may be too much for smaller jobs


This is actually a combination of Milwaukee’s 4203 adjustable base and the 4262-1 electromagnetic drill press. The base is easy to adjust so lining up the bit is a quick job. It adjusts 3/4 inch from front to back and tilts 20 degrees left or right.

As for power, it can produce 1670 pounds of pressure on a 1-inch steel plate. Bit changes are simple, too, thanks to a 3/4 inch chuck that eliminates slipping and reduces breakage.

This is the best mag drill if you’re looking for something that’s professional grade. It’s loaded with features that make it a great choice for a professional. The front to back adjustment and tilt make it versatile enough for just about any job.


2. DEWALT DWE1622K 2-Speed Magnetic Drill Press - Best Value

  • 10 amp motor,
  • 2-speed settings
  • No Load Speed: 300/450 rpm
  • Overload protection electronics which prevent motor damage
  • Quick Change chuck system
  • Magnetic coolant bottle can be placed on either side of tool or on a work surface
  • 4-3/8 inch Drill travel offers maximum capacity for heavy duty applications


  • Very popular model.
  • Solid design with a powerful motor.
  • Perfect mag drill for DIYer work shop.


  • Some users noted that the cutters and drill chuck wobble because of the design.
  • Not recommended for industrial use.


The DEWALT DWE1622K is one of the best mag drills in it’s price range.

While quite not as big and powerful as an industrial magnetic drill press, it still packs a punch for most everyday uses.

3. Steel Dragon Tools MD40 Magnetic Drill Press - Best Budget

  • Drill Capacity: 1 1/2 in
  • Volts: 110
  • RPM: 670
  • Weight: 34.5 lbs
  • Dimensions:  16.4 x 16.2 x 8.5 in


  • Affordably priced
  • Suitable for any metal surface
  • Powerful magnetic force
  • Gear system designed for accurate drilling depths


  • Instructions aren't clear
  • Some difficulty fitting various drill bits
  • Metal surface has to be clean for maximum magnetic force


The Steel Dragon MD40 is a reliable tool at a bargain price. With 2700 pounds of magnetic force and a maximum boring diameter of 1 1/2 inches, this tool is suitable for any metal surface. The magnetic force is even powerful enough that you can use it upside down and it will not move while you’re drilling. The rack and pinion gear system provides consistent and accurate drilling depths and the high rpm will get the job done fast.

If you’re looking for a bargain, the Steel Dragon MD40 is it. The powerful magnetic force keeps the drill from moving while in use. It consistently gives precise results and has a high rpm for maximum speed.

4. Evolution Power Tools EVO28 Magnetic Drilling System

  • Drill Capacity: 1 1/8 in
  • Volts: 120
  • RPM: 570
  • Weight: 38 lbs
  • Dimensions:  19 x 9 x 13 in


  • Reasonably priced
  • Chuck and key adapter included
  • Integrated cooling system
  • Versatile handle that can be used on left or right side


  • Coolant attachment can come loose easily
  • Not as effective with titanium
  • Limited applications to metals that are very hard


Evolution Power Tools magnetic drill includes some great features at a reasonable price. It works great with steel and aluminum and the heavy-duty magnetic force keeps things stable while you work. The solid construction is built to last and it even includes a 1/2 inch chuck and key adaptor. The integrated cooling system does the job. With right or left side handles, this is a versatile tool that anyone can get a good grip on.

Evolution Power Tools has built a magnetic drill that’s really built to last. If your jobs are limited to metals like aluminum and steel, this tool has more than enough power to give you great results. It’s reasonably priced and is adjustable so that even lefties can get maximum control and precision.

5. FEIN JHM ShortSlugger Mag Drill Press

  • Extremely compact and portable magnetic-base drill.
  • 1-3/16-inch maximum cutting diameter and 2-inch depth.
  • Optimum power-to-weight ratio for working at-height.
  • Concealed motor wiring prevents snags in tight spaces.
  • Removable integrated tank with gravity-fed cooling.


  • Compact and portable
  • Great for high or tight spaces
  • Smart Magnet circuitry that prevents it from working if the magnet hold isn't strong enough.


  • A little on the pricey side
  • Compact size makes it slightly less powerful than larger models


Jancy’s JHM Series magnetic drill is portable and compact, ideal if you need something that can work at height. The motor wiring is concealed and the power-to-weight ratio is ideal for tight or high spaces. It’s fast, too, with a no-load speed of 680 rpm. It’s built well and provides a stable platform when you’re working. One of the best things about it is the Smart Magnet circuity. If you’re even in a position when the drill isn’t able to get a good enough grip on the surface, it stops.

This magnetic drill from Jancy is lightweight, compact, and portable so you can do just about any job, anywhere. It was built well and remains stable and supportive during use. Plus, it’s loaded with safety features.

6. Hougen HMD904S Portable Magnetic Drill Press

  • Drill Capacity: 2 in
  • Volts: 115
  • RPM: 450
  • Weight: 30.5 lbs
  • Dimensions:  18 x 9 x 20 in


  • Pilot light included for accurate results in low lighting
  • Swivel base for easy alignment
  • Feed handle can be changed from left to right


  • A little pricey
  • Coolant system not included


For the best mag drill that’s lightweight and compact while still packing a lot of power, you have to check out the Hougen HMD904S. It has a large 2-inch capacity and spins at 450 rpm. For low light conditions, they’ve included a pilot light for better visibility. Plus, the base swivels so you can line up the bit precisely every time. Redesigned housing is stronger and ergonomic plus the feed handle changes from side to side. This is a versatile tool that’s accurate, fast, powerful, and proudly made in the USA.

The Hougen HMD904S is perfect for fabrication. It’s powerful, versatile, and has a large 2-inch capacity. An added pilot light gives you clear visibility in low-light conditions so you can focus on accuracy no matter where you’re working

7. Steel Dragon Tools MD45 Magnetic Drill Press

  • Steel Dragon Tools MD45 Magnetic Drill Press with 2700 lbs. maximum force.
  • Maximum Boring Diameter: 1-3/4 in. (45 mm)
  • Includes MT2 to 3/4-inch Weldon Adapter spindle adapter.
  • Spindle Speed (No-Load Speed): 0-500 RPM Variable Speed
  • Maximum Boring Depth: 7 in. (180 mm)


  • Variable speed from 100 to 500 rpm
  • Strong magnetic power
  • Adapter included for MT1 or 3/4 Weldon Shank


  • A little pricey
  • heavier than comparable models
  • Some users mentioned occasional problems with the magnet being lopsided


The MD45 from Steel Dragon Tools has a powerful magnet that gives 2700 pounds of pulling force. Even when you’re working with thick metal, this drill will stay in place. The base is strong and stable so you can get precision results. It includes an adapter so you can convert from an MT2 to an MT1 or a 3/4 Weldon Shank which gives you a lot of versatility so you can get exactly the results you need. With variable speed from 100 to 500 rpm, it can adjust to the kind of metal you’re using for the most effective results with every job.

Steel Dragon Tools MD45 offers an adjustable speed from 100 to 500 rpm so you can get the right setting no matter what kind of metal you’re using. The magnet is strong and works well enough that you can use this drill upside down if need be.



Model Weight Speeds Warranty
Milwaukee 4206-1 70 lbs Variable 5 years
DEWALT DWE1622K 47.6 lbs 2 3 years
Steel Dragon Tools MD40 34.5 lbs 1 1 year
Evolution EVO28 38 lbs 1 3 years
FEIN JHM ShortSlugger 34 lbs 1 3 years
Steel Dragon MD45 47 lbs Variable 1 year
Hougen HMD904S 30.5 lbs 1 1 year

Buying Guide

Before we get into the details, let’s first focus on what exactly a magnetic drill is and what it’s used for.

What Is a Magnetic Drill?

A magnetic drill, which is sometimes called a magnetic drill press, is designed to drill holes in metal. It’s a little different than a drill press, which is a stationary tool meant for drilling into wood. For one thing, it’s portable. Plus, it’s meant to cut metal, which is why it has a magnet.

So, how does it work?

The magnetic base attaches to the metal to hold it in place. You get really accurate results because you attach the drill exactly where you want it to drill and it doesn’t move, even when the drill is working.

Something really cool about these tools is they can be used in any position. As long as the magnet is strong enough, you can use it vertically, horizontally, or even upside down. There are lots of different tooling and bits available for them, too, so they’re really versatile if you work with metal.

Electric drill presses are the most common because they’re portable and easier to use on a job site. We focused primarily on electric for precisely this reason but wanted to mention two other options.

Magnetic drills are also available in hydraulic and pneumatic options. If you need to do work underwater, you’ll need to get a hydraulic mag drill because they’re designed with a closed loop system that keeps the motor separated from the water. If you want to be able to work in inclement weather, go with a pneumatic option. Since there’s no electricity, you don’t have to worry about an electric shock.

Who Needs a Magnetic Drill Press?

Magnetic drills are particularly useful because of their portability. Rather than having to take large, awkward sheets of metal to a stationary press, you can take to tool to the material. If you work in fabricating, welding, construction, or the automotive industry, a magnetic drill will save you a lot of time and make every job easier.

That said, they’re not cheap. You don’t really need one unless you’re going to use it on a regular basis or you’re working on a major project that will take some time. If you don’t work with metal regularly, think about whether or not you want to make the investment. This is the kind of thing that you don’t always need but you’ll be happy to have it when the opportunity to use it comes up.

Things to Consider

Here are some things to think about to help you choose the right magnetic drill for you.

Budget. Seriously, these things can get pricey. At the same time, though, there are some reasonably priced options. The price range is pretty wide so you can find options that fit into your budget if you decide this is an investment you want to make.

Type of Job. You should have some idea of what you want to do with your magnet drill before you buy one. They come with different cutting diameters, rpm, etc and you need to match the abilities of the tool to the job you’re hoping to do.

Convenience. This is a portable tool but they are still quite heavy. They can get pretty big, too. If you’re planning to work in a small space or do a job that requires you to climb a ladder frequently, make sure you pick a magnetic drill that you’ll be able to move easily.


We touched on some of the main things you should think about in our magnetic drill press reviews but let’s take a closer look.

  • Drill Capacity. This is the largest diameter that the tool can cut. Just in the 6 products in the reviews, the range is pretty impressive, from ¾ to 2 inches and everything in between. Adapters are available if you want to make some changes but keep in mind that’s an added expense on an already pricey tool. This is why it’s important to know what kind of work you’ll be doing. You can get the right capacity when you buy.
  • Volts. We stuck to electric magnetic presses and they’re all 110 to 120 volts. You can use an AC adaptor or whatever power supply came with the tool and plug it into any standard socket in the US.
  • RPM. Obviously, this is rotations per minute. The number you’ll see here is the no-load rpm, which means it’s how fast it spins when it’s not drilling into anything. This is a good indication of the speed because it doesn’t take the load into account. The load or material will change the rpm depending on its thickness and density. Giving you the no-load rpm makes it a little easier to compare the different magnetic drills to one another. It’s not an exact comparison but it does give you some idea.
  • Weight. Remember, this is supposed to be a portable tool so you have to consider the weight. The weight range here is pretty significant and none of them are what you’d expect for a portable tool. For example, the lightest one is 30.5 pounds. So, keep weight in mind as you shop.
  • Dimensions. Again, because this is a portable tool, you have to keep the dimensions in mind. If you’re going to be working in a small space, try to get a compact magnetic drill is you can.

One more thing we wanted to mention is variable speed. One of the products in the reviews has a variable speed function. Basically, that means that it adjusts the power so it’s at the level it needs to do a specific job. Compare that to other tools that go to full power the second you turn them on and stay at 100% for the whole job. Variable speed is a little more versatile because you can adjust it to each specific job. It’s also a little easier on the tool because it’s not getting worn as quickly.

Other Guides

About Jacob Hanson

Jacob is the Editor at He used to be the owner of a local construction company with over 20 years experience in the trade. He now enjoys thoroughly researching DIY tools as well as publishing guides to help readers.


    Leave a Reply

    Your email address will not be published. Required fields are marked *